Hello and welcome!

On 1 July 2021 there will be an EU regulation on what VAT you have to pay when buying online.

In order for you to see the correct VAT, we have automatically retrieved information about which country you are in. Please change it if it was wrong. This information is only used to show the correct VAT on the products.

The correct VAT will automatically be shown at the checkout regardless of the country you choose here.

We have used your IP number (3.236.84.188) for this check.

Country:


  • Trend UNIBASE - Router base adaptor
The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers.
Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base.
Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch.
Instructions for fitting
The line-up pin fit into the collet and is plunged through the router base. The line-up bush is fitted into the Unibase and secured. This is then placed over the line-up pin and rotated in order to line up the fixing holes. The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10mm up to 30mm (GB10 - GB32). For larger diameter cutters a 40mm guide bush (GB40) is available.

Write a review

Note: HTML is not translated!
    Bad           Good

Trend UNIBASE - Router base adaptor

  • Brand: Trend UK
  • Product Code: UNIBASE
  • Availability: In Stock
  • 313.75kr (SEK)

  • Ex Tax: 251.00kr (SEK)

Tags: Trend UNIBASE - Router base adaptor, UNIBASE, Universal Sub-base