Hello and welcome!

On 1 July 2021 there will be an EU regulation on what VAT you have to pay when buying online.

In order for you to see the correct VAT, we have automatically retrieved information about which country you are in. Please change it if it was wrong. This information is only used to show the correct VAT on the products.

The correct VAT will automatically be shown at the checkout regardless of the country you choose here.

We have used your IP number (35.172.136.29) for this check.

Country:


Veritas® Dowel and Tenon Cutters

Veritas® Dowel and Tenon Cutters - Woodworking
These cutters can be used two ways. Using them like a hand-held pencil sharpener, you can put accurate tenons on the tips of turnings or on rustic furniture components. The cutters can also be used with a power feed to make accurate dowelling. 

Most commercial dowelling is available only in nondescript Asian wood that has been milled, not turned. It is never perfectly round and seldom accurately sized. Using a hand drill for power, you need only cut square stock slightly oversize (1/16" over is ample) and use a square socket to power the stock through the dowel cutter. The carbon-steel blade in the plated zinc-alloy body is adjustable. 

Works equally well in soft, green or hard woods. The curved blade is relatively easy to sharpen when required. Available in three finish diameters: 3/8", 7/16" and 1/2". The optional straight blade can be used to cut tapered tenons. 

Dowel and tenon cutters made in Canada. Patented.

Write a review

Note: HTML is not translated!
    Bad           Good

Dowel Cutter, 7/16 inch

  • Brand: Veritas tools
  • Product Code: 05J60.03
  • Availability: In Stock
  • 620.00kr (SEK)

  • Ex Tax: 496.00kr (SEK)

Tags: Dowel Cutter, 3/8 inch, 05J60.01, Dowel and Tenon Cutters